a. Please make sure both the remote and the board can be turned on. (The LED indicator on the remote should blink when the remote is turned on. If the LED indicator on the remote doesn’t turn blue when the remote is turned on, please first try replace the AAA batteries inside. As the battery may wear off during transportation. If after you replaced the batteries, the LED indicator on the remote still doesn’t turn show, it should be remote problem, you may need to purchase replacement.)

b. Please try to re-sync your remote with your board, by following the instruction

c. If after successfully syncing your remote with the board, but the board still doesn’t respond to the remote, please submit a support ticket.

Please make sure the Bluetooth is turned on on your smart devices. Please also make sure both the remote and your board are turned on as well.

Please make you have the latest version of the ACTON App, visit App Store or Play Store to check if there’s any update.

Try to connect with the board using a different smart device.

If you still cannot find the skateboard on any of your smart devices, please submit a support ticket.

The account on actonglobal.com is not the same as the account on ACTON App. Username and password are case sensitive, please make sure you enter the correct account information. You can also reset your password using the email you used for the ACTON App account.

The range estimates are based on relatively level riding environment designed to reflect “light” riding conditions and rider behavior.

Conditions to achieve optimal range:

Rider Mode: Beginner at cruising speed.

How and where you ride: Smooth, consistent riding without having many changes in acceleration and braking.

**Don’t forget to turn off the board and remote when you are not riding it! This can help preserve its range**

BLINK S-R

Please try to resync your remote with your board, by following the instruction. 

BLINK S

a. Please make sure both the remote and the board can be turned on. (The LED indicator on the remote should blink when the remote is turned on. If the LED indicator on the remote doesn’t turn blue when the remote is turned on, please first try replace the AAA batteries inside. As the battery may wear off during transportation. If after you replaced the batteries, the LED indicator on the remote still doesn’t turn show, it should be remote problem, you may need to purchase replacement.)

b. Please try to resync your remote with your board, by following the instruction.  After resync, make sure the switch button under the battery cover is put to the right position.

c. If after successfully syncing your remote with the board, but the board still doesn’t respond to the remote, please submit a support ticket

Please make sure the Bluetooth is turned on on your smart devices. Please also make sure both the remote and your board are turned on as well.

Please make you have the latest version of the ACTON App, visit App Store or Play Store to check if there’s any update.

Try to connect with the board using a different smart device.

If you still cannot find the skateboard on any of your smart devices, please submit a support ticket.

Please make sure your remote is turned on.

The account on actonglobal.com is not the same as the account on ACTON App. Username and password are case sensitive, please make sure you enter the correct account information. You can also reset your password using the email you used for the ACTON App account.

The range estimates are based on relatively level riding environment designed to reflect “light” riding conditions and rider behavior.

Conditions to achieve optimal range:

Rider Mode: Beginner at cruising speed.

How and where you ride: Smooth, consistent riding without having many changes in acceleration and braking.

**Don’t forget to turn off the board and remote when you are not riding it! This can help preserve its range**

The BLINK Lite V2 is marked on the product packaging. 

The BLINK Lite V2 is marked on the receipt.

The BLINK Lite V1 has Bluetooth， The BLINK Lite V2 does not have Bluetooth.

Download BLINK Lite V1 User Manual HERE

Download BLINK Lite V2 User Manual HERE

a. Please make sure both the remote and the board can be turned on. (The LED indicator on the remote should blink when the remote is turned on. If the LED indicator on the remote doesn’t turn blue when the remote is turned on, please first try replace the AAA batteries inside. As the battery may wear off during transportation. If after you replaced the batteries, the LED indicator on the remote still doesn’t turn show, it should be remote problem, you may need to purchase replacement.)

b. Please try to resync your remote with your board, by following the instruction.  After resync, make sure the switch button under the battery cover is put to the right position.

c. If after successfully syncing your remote with the board, but the board still doesn’t respond to the remote, please submit a support ticket

a. Please try to resync your remote with your board, by following the instruction.  After resync, make sure the switch button under the battery cover is put to the right position.

b. If after successfully syncing your remote with the board, but the board still doesn’t respond to the remote, please submit a support ticket

Please make sure the Bluetooth is turned on on your smart devices. Please also make sure both the remote and your board are turned on as well.

Please make you have the latest version of the ACTON App, visit App Store or Play Store to check if there’s any update.

Try to connect with the board using a different smart device.

If you still cannot find the skateboard on any of your smart devices, please submit a support ticket.

Please make sure your remote is turned on.

The account on actonglobal.com is not the same as the account on ACTON App. Username and password are case sensitive, please make sure you enter the correct account information. You can also reset your password using the email you used for the ACTON App account.

The range estimates are based on relatively level riding environment designed to reflect “light” riding conditions and rider behavior.

Conditions to achieve optimal range:

Rider Mode: Beginner at cruising speed.

How and where you ride: Smooth, consistent riding without having many changes in acceleration and braking.

**Don’t forget to turn off the board and remote when you are not riding it! This can help preserve its range**

a. Please make sure both the remote and the board can be turned on. (The LED indicator on the remote should blink when the remote is turned on. If the LED indicator on the remote doesn’t turn blue when the remote is turned on, please first try replace the AAA batteries inside. As the battery may wear off during transportation. If after you replaced the batteries, the LED indicator on the remote still doesn’t turn show, it should be remote problem, you may need to purchase replacement.)

b. Please try to resync your remote with your board, by following the instruction.  After resync, make sure the switch button under the battery cover is put to the right position.

c. If after successfully syncing your remote with the board, but the board still doesn’t respond to the remote, please submit a support ticket

Please submit a support ticket.

Please submit a support ticket.

Please submit a support ticket.

Please submit a support ticket.

Please submit a support ticket.

Please submit a support ticket.

Download BLINK S User Manual HERE.